OEM 30 Ton Front Attachments Excavator Extension Arm For Dredging River

OEM 30 ton Excavator Front Attachments Extension Excavator Arm For Dredging River

01 Use Q355B material,
02 Adopts precision steel pipeline
03 Adopt alloy copper sleeve big arm base
04 Two layers groove welded to ensure
05 Double quality inspection before leaving
06 The tolerance of position size within 1 mm
07 Angle of boom and arm can reach 163°

1. The plate is wear-resistant and high-temperature resistant square steel with high tensile strength. Each plate is verified by the inspection institution

2. The shaft sleeve on the arm adopts the German standard JSUN super-runin gold shaft sleeve. In the process of movement, each hole of the shaft sleeve of the excavator can automatically oil out, and the lubrication is free of blind area, so that the excavator and the long arm can be more smoothly in the process of work.

3. The excavator lengthened the upper arm pipeline and selected the standard precision phosphating pipe to prevent tubing blockage and other problems.

4, professional welding technology, full weld rules, every weld after weld inspection.

1. Applicable for all brand excavator.

2. Color, length, material can do according to you.

3. Extra pipeline can be added to suit to some extra application.

4. Boom cylinder and stick cylinder can also be supplied if customer want.

1. Online support within 24 hours.

2. Appointment video technical support.

(Our engineers have focused on excavator boom and attachment over 10 years)

3. Long excavator boom shall be two/three jointed pcs to make it fittable into container to save shipping cost

According to customer requirements design and production of two-stage excavator elongated arm, mainly suitable for earth and stone foundation and deep cut excavation operations; It is widely used in river dredging, port construction, subway construction and building foundation excavation, with wide operating range, high efficiency and high safety.

When users extended arm in order to save costs, we carefully analyzed the original car which accessories can use back to the original, which is must be replaced, replace standard arm extended arm of standard configuration is as follows: lengthen the forearm a, scoop a, 4 a bucket cylinder, hoses, butter tube 3, a connecting rod assembly, transportation, a connecting rod, pin 6.

1. Long reach excavator boom

2. Excavator telescopic boom

3. Demolition boom

4. Excavator rock bucket

5. Excavator tilting bucket

6. Hydraulic grabs for excavators

FIRST--CORE CRAFT TECHNOLOGY

1. Less maintaince

2. Strong and sturdy

Q1: Why not have boom and stick cylinders in the plan?
A1: First, the whole long arm is lengthening, but the boom just lengthening from its middel sleeve to its end, so the original boom and stick cylinder can be used. Second, using the original parts can save your cost.

Q2: How long is the boom arm can min excavator be be configured with? Whether it is necessary to increase the counterweight?
A2. Generally speaking, 30-40 excavator longest arm suggests to be 8 meters, can configure 0.1 cbm bucket, no need extra counterweight. 55 excavator longest arm suggests to be 12 meters, can configure 0.1-0.15 cbm bucket, need 0.5 ton extra counterweight. 60-80 excavator longest arm suggests to be 12 meters, can configure 0.15-0.25 cbm bucket, need 0.5-0.7 ton extra counterweight.
It is not recommended to extend boom arm to longest length as min excavator is easy to sloshing.

Q3: How long will it takes to install a excavator long reach boom?

It depends on the installer and machine size.
Usually disconnect the original boom arm, stick cylinder, then pin the new one is okay.
Kindly remind, prepare several containers to fill the oil before disassemble.

Esteblished in 2018, Kaiping Zhonghe Machinery Manufacturing Co., Ltd., a manufacturing and trading combo, specializes in customizing different kinds of excavator boom arms and attachments