Breathable Tie - On Disposable Medical Face Mask

Breathable Tie - On Disposable Medical Face Mask

Products Features

Non woven face mask is made of spunbonded non woven fabric and meltblown non woven fabric
Low respiratory resistance, no odor, no irritation.
Adjust nose bar can fit the face very well and offer high protection
Nose bar is made by aluminum and plastic, which can not only save the cost, but also more comfortable
Fine and soft material will not irritate the skin, effectively filter dust and bacteria in the air

Intended Use:

The medical face mask is single-use, disposable device, provided non-sterile, and

intended to be used for patients and other persons to reduce the risk of spread of infections

particularly in epidemic or pandemic situations.

Structure and Components:

This mask is made by blank mask, nose piece and tie-on belt. The blank mask is made

by three layers. The inner and outer layer are non-woven fabric, the middle layer is Melt-

blown polypropylene.

Main performance:

1) Bacterial filtration efficiency: ≥95%;

2) Differential Pressure: ＜40 Pa/cm 2 ;

3) Microbial cleanliness: ≤30 cfu/g.

Instruction for tie-on face mask:

1. Open a mask, with the dark side facing outwards, hold the mask by hand and cover it

on your face, make sure that the nose clip is located on the upside of the mask.

2. Pull the mask belts above the ears and tie it appropriately on the top of the head.

3. Pull the rest of the mask belts below the ears and tie it appropriately over the back

of the neck.

4. Adjust the nose clip to fit the shape of the bridge of the nose, and then adjust the tightness

of the mask belts to make the mask fit your face.

5. Do not touch the front of the mask when removing a mask. You are supposed to untie the

mask belts first and then discard it into an specified container.

Hunan EEXI Technology&Service Co., LTD., founded in 2018, is an enterprise engaged in the production of baby and maternity products. The company covers a total area of 88,000 square meters with a building area of 137,000 square meters. After the outbreak of the “COVID–19” in 2020, our company applied and obtained the production license of medical devices and other qualifications within a short time and transformed into the production of KN95, disposable medical masks (non-sterile and sterile, including children size face masks) and surgical masks (non-sterile and sterile). Currently, our company has built 100 production lines for disposable face masks (including two high-speed mask machines) and 150 sets of KN95 equipment. With a total number of over 6000 employees, our company produces more than 10 million disposable masks and more than 6 million masks per day. Worldwide acknowledged certifications such as CE/FDA/ISO, including ISO9001, ISO14001 and ISO13485, certificated by SGS/TUV/CCQS etc.