Integrated Liquid Vortex Type Flow Meter Explosion Proof Simple Installation

Integrated Vortex Flow Meter with Explosion Proof for Liquid

1. Introduction

Based on The vortex principle of VonKarman, LUGBML adopts piezoelectric crystal as the test element. It is a new type of vortex flowmeter for stress detection. It has the advantages of large range ratio, high precision, small pressure loss, good versatility of the medium, direct ratio of pulse output to flow, easy to connect with the computer, etc., because the sensor probe and eddy current generator are installed separately, high temperature resistant piezoelectric crystal does not contact the instrument structure is simple, good versatility, high stability. LUGBML series vortex flowmeter sensors can be used to detect and measure the flow of various gases, liquids and vapors. It can be used with our ML6000 series vortex flowmeter. It can also be combined with computer and temperature, pressure, density sensors to form a high-precision mass flow or heat flow detection system.

2. Features

• The structure of Vortex Flow Meter is simple and solid, no movable parts and it is very stable.
• Simple installation and easy maintenance.
• Wide measuring range, the ratio is up to 10:1.
• The volume of fluid is compensated according to requirements, and the instrument coefficient does not need to be re-calibrated after the replacement of the accessories.

3. Specifications

4. Dimensional Sketche

5. Design & Installation

The installation of the instrument is very important, if the installation is not good, it will affect the accuracy, service life and damage.

1. In order to avoid high-power, high-frequency, high-power switch groups, instrument power supplies should be avoided near these devices.

2. Avoid high temperatures and radiation sources. If installation is required, thermal insulation and ventilation measures should be taken.

3. In order to avoid high temperature and enchanted gas, ventilation measures should be taken if installation is needed.

4. The eddy current flowmeter should not be installed in the sloshing part of the pipe. If it must be installed on it, a clamping device and a vibration pad located in 2D should be added to enhance shock resistance. It is best to install the instrument indoors, pay attention to waterproof during outdoor installation, and pay special attention to the joint to make the cable wire U-shaped, so as to prevent water from entering the amplifier body, and enough space should be saved at the installation place for installation and routine maintenance.

6. Details

Melan Measurement & Control Instruments is located in Shanghai City. It is a high-tech manufacturer specialized in the design, development, manufacturing and sale of measurement and control instruments.

Our products are widely used in various fields, including electricity, chemical industry, metallurgy, brewing, oil and gas, textile, water conservancy, environmential protection, etc.

We own independent-courtyard modemized manufacturing workshops and an open office building. Melan has accumlated production and management experience in instruments from European and American and domestic famous companies.

We own first-class talent team, and all the products have reached advanced level at home and abroad. We provide our customers with complete and professional test control solutions and high-tech and high-quality products.

Melan is your reliable friend and partner. We are willing to try our best as dedication and perfection as motivation.

Our Company

Meeting Room

Showroom

Warehouse

Calibration System

Workshop