Airtac Type SI63X100 Double Acting Air Cylinder 63mm Bore 100mm Stroke

Airtac Type SI63X100 Double Acting Air Cylinder 63mm Bore 100mm Stroke

Purpose and Type of Pneumatic Cylinders:

The shape, material, and size of the cylinders depend on the purpose one is using them. The different materials that are used for pneumatic cylinders include stainless steel, steel, nickel-plated brass, and aluminum. The way the materials are chose for the devices involve considering several factors such as amount of loads, specific stroke length, temperature, and humidity. The devices also come in a wide range of body constructions, which include:

Flanged type cylinders: the ends of these cylinders feature fixed flanges.

Tie rod cylinders: these are the most common type of cylinder structure and find their use in a huge variety of loads. These are also proven the safest form to work with.

Threaded end cylinders: in these, the ends tend to attached to the tube body.

One-piece welded cylinders: the ends of these cylinders are welded or crimped to the tube.

Specifications of SI Series Pneumatic Cylinder:

Stroke of SI Series Pneumatic Cylinder:

Symbol of SI Series Pneumatic Cylinder:

Ordering Code of SI Series Pneumatic Cylinder:

Criteria for selection: Cylinder thrust:

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on