USB Interface Surge Protector Socket , 10 Amp / 20 Amp Single Plug Surge Protector

power converter power switch socket lightning surge conversion socket with USB interface

Working principle of product

The lightning protection conversion socket is an instantaneous voltage absorber. It uses lightning rod or varistor and is installed between the input lines to form an infinite impedance. When instantaneous voltage is applied, the resistance device is rapidly reduced, and transient energy is transmitted to protect the efficiency of internal electrical equipment. Therefore, the lightning protection socket can effectively absorb surge pulses in the power supply system, so that the appliance can be used safely in harsh environment.

Product features

1. lightning protection socket has low residual pressure and large flow capacity

2. the inner and outer shells are made of flame retardant materials, which are blocked by open fire and high temperature resistance, and the materials are safe and environmental friendly.

3. with temperature and overcurrent failure protection circuit, it does not affect the normal operation of the circuit.

Product specification

Brief introduction

The lightning protection conversion socket is one of the transformers, which can convert the use of different voltage. Because of the different power environment in all countries and regions in the world, the civil voltage is also different. The range of voltage application and the plug standard are different in various countries. For example, if the electric appliance is used for different standards, it is necessary to use the converter.
When the operation is overvoltage or the lightning overvoltage is overvoltage, the energy that the ordinary power converter can only absorb and its limited absorption can not even be completely absorbed. Once the maximum value of its absorption energy is reached, the internal temperature fuse will disconnect and cut off the power supply. The power converter no longer provides power and anti surge protection for your equipment, and the lightning protection and anti surge protection converter can automatically restore the switch protection for you to solve this harm and trouble.

Use of attention

1. suitable for indoor operation

2. the load power of lightning protection socket should not exceed the rated power of lightning protection socket.

3. lightning protection socket frame type lightning protection socket press the power switch button, the grounding indicator light (yellow), indicating that the ground is reliable; the work indicator light (green), indicating the normal work of the lightning protection module; the power indicator light (red), indicating the normal connection of the power supply.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.