Categories | Tungsten Carbide Wear Parts |
---|---|
Brand Name: | HGalloytool |
Certification: | ISO9001: 2008 |
Place of Origin: | Hunan, China (Mainland) |
MOQ: | 5 KG |
Payment Terms: | L/C, T/T |
Supply Ability: | 20000 Kilogram per Month |
Delivery Time: | 20~30 Days after Your Order Confirmed |
Packaging Details: | Shock Resistance Foam First in Plastic Box and Then Carton Boxes Outside |
Model Number: | Various |
Applicable Season: | Winter |
Material: | 100% Virgin Tungsten Carbide |
Application: | Carbide Spike Pins for Tire Stud |
ISO Code: | K10 |
Advantage of Tire Studs: | Comfortable Driving |
Tire Studs Installation: | by Stud Gun |
Feedback: | within 24 Hours |
Professional K10 K15 K20 Tungsten Carbide Car Tire Nail Studs
Grade & Application of tungsten carbide pins for tire stud:
ISO Code | Grand | Physical and mechanical properties | Applications recommended | ||
Density g/cm3 | Hardness HRA(HV) | TRS Mpa | |||
K05 | YG3 | 15 | 90.5 | 1300 | Suitable for finishing of cast iron and nonferrous metal. |
K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
YG6A | 14.7 | 91.5 | 1510 | ||
K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
K20 | YG8 | 14.6 | 89 | 1840 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
YW3 | 12.9 | 92 | 1390 | ||
YW4 | 12.3 | 92 | 1390 | ||
M20 | YW2 | 12.9 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
P10 | YT05 | 12.6 | 92.5 | 1260 | Suitable for the finishing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
YT15 | 11.3 | 91 | 1300 | ||
P20 | YS14 | 11.4 | 91.5 | 1550 | Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. |
YT14 | 11.4 | 90.5 | 1400 | ||
YS25 | 13 | 90.5 | 1780 | ||
P30 | YT5 | 12.8 | 89.5 | 1560 | Suitable for the heavy duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
K05-K10/M20 | YT26 | 14 | 92.5 | 1600 | Suitable for fine and semi-finishing machining of chilled cast iron and nonferrous metals with good performances of wear resistance, also suitable for turning and milling of manganese steel and hardened steel. |
K20 | YD201 | 14.9 | 91 | 1800 | Suitable for semi-finishing and the roughing of cast iron and light alloys and also for the milling of cast iron and low alloy steel. |
M05-M10 | YS8 | 13.9 | 92.5 | 1720 | It can be used for the finishing of iron based and nickel based high-temperature alloys and high -strength steel and it can also be used for the finishing if chilled cast iron, heat resistant stainless steel, high manganese steel resistant stainless steel, high manganese steel and hardened steel. |
M10 | 60 | 12.8 | 92.5 | 1500 | Mainly used for threading of petroleum pipe, also used for fine machining of hardened steel. |
M20 | YM20 | 13 | 91 | 1750 | |
P30 | YC30S | 12.9 | 90 | 1600 | Used for the milling of steel, cast steel and alloy steel. |
P35-P40 | YC40 | 12.9 | 91 | 2200 | Suitable for the heavy duty turning of steel and cast steel with a big steel rate under unfavorable working condition. |
P40 | YM40 | 12.75 | 90 | 2100 | Suitable for the heavy duty turning of steel and cast steel with a big steel rate and also for face milling. |
YC45 | 12.75 | 90 | 2300 |
Usage:
Wide application:
Our Service:
1. We provide quality promise worldwide for any part of the tungsten carbide products (best equipment + accurate machine checking and test).
2. We provide repair service with low cost for any machine over the warranty period.
3. We provide 24 hours pre-sales and after-sales service for any customer, please contact us by email and Aliwangwang to get the immediate response.
4. We provide OEM service for business channel or educational institution.
FAQ:
Q: Are you a manufacturer? | A: Yes, we are. |
Q: What's the payment term? | A: We accept Western union, One touch, T/T, and L/C. 30% T/T
deposit and 70% balance before shipment, or against copy of BL, or
L/C at sight. |
Q: How about delivery time? | A: For ready to press items, lead time is 20~25 days, while for new molds, it will need 10 days more to open molds. If you have an urgent order, we will do our utmost to push for it. |
Q: What is your warranty? | A: We extend a 100% satisfaction guarantee on all items. If you’re not completely satisfied with our products, we’ll replace them or refund the fee. |